Technicqll shoe glue 20ml

Technicqll Shoe Glue is a colourless adhesive for repairing footwear, sports shoes included. Use it to glue a loose sole or a lifting toe cap, and on bags, belts and other leather goods. It bonds leather, artificial leather, crepe, various types of rubber (such as perbunan), coated fabrics, most plastics (polyurethanes, PVC, nylon), felt and wood. It does not bond polyethylene, polypropylene or PTFE.

The bond is waterproof and weather resistant (snow, rain, changes in temperature). The adhesive contains no toluene or cyclohexane.

Use

• The surfaces must be clean, dry and free of grease. For a stronger bond, roughen them with sandpaper.
• Apply a thin layer of adhesive to both surfaces. On porous materials, apply two layers.
• Let the adhesive dry until the surface feels dry to the touch. The open time is 5 minutes.
• Press the surfaces firmly together: the strength of the bond depends on it.
• Fix the parts in place and let the joint dry for 12 hours.
• To speed up solvent evaporation, you can warm the spread adhesive with a hair dryer or heat gun, to no more than 80 °C.
• A comfortable working temperature is above 18 °C: in the cold the solvent evaporates more slowly.
• Make sure the room is well ventilated while you glue and while the solvent evaporates.
• Clean tools and fresh stains with a solvent such as petrol.

Technical data

• Content: 20 ml
• Colour: colourless
• Open time: 5 min
• Final cure: 12 h
• Temperature resistance: -30 °C to +80 °C
• Storage temperature: +5 °C to +25 °C
• UFI: EQ00-007T-500D-4R20
• Product code: R341

Safety

• Contains acetone and ethyl acetate.
• Highly flammable liquid and vapour.
• Causes serious eye irritation.
• May cause drowsiness or dizziness.
• Repeated exposure may cause skin dryness or cracking.
• Keep out of the reach of children.
• IF ON SKIN (or hair): take off all contaminated clothing immediately and rinse the skin with water or shower.
• IF INHALED: move the person to fresh air and keep them in a position comfortable for breathing.
• IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, and continue rinsing.
• Store in a well-ventilated place and keep the container tightly closed.
• Dispose of the contents and container in line with the waste regulations in force.