Technicqll Silver Glue electrically conductive silver adhesive 2g

Technicqll Silver Glue is a silver-based, electrically conductive adhesive (lacquer) for restoring broken electrical connections. You can use it to repair connections in radios, televisions and photo lamps and in car window heating systems. It also joins electronic and electromechanical parts, connectors, contacts and printed circuits.

The pack includes a precision brush. Apply the adhesive only with this brush, because applying it with anything else reduces its electrical conductivity.

How to use

• Shake the product well for about 2 minutes before use.
• The surfaces must be clean, dry and free of dirt and grease.
• Apply the adhesive to the surfaces. Once the first coat has set (about 5-10 minutes), apply a second coat if needed. 2-3 coats are recommended.
• The adhesive becomes conductive after 8-24 hours, depending on temperature and humidity, and cures fully in 24 hours.
• Connect the repaired parts to a power source only once the adhesive has dried completely.
• To protect the restored connection, cover it with a layer of epoxy, for example Technicqll E-358 1-minute epoxy adhesive.

Technical data

• Colour: silver
• Conductive after: 8-24 h
• Full cure: 24 h
• Storage: +5°C to +20°C
• Pack: 2 g, with precision brush

Warning

• Flammable liquid and vapour.
• May cause drowsiness or dizziness.
• Repeated exposure may cause skin dryness or cracking.
• Keep out of the reach of children. Store in a closed container in a well-ventilated place.
• If on skin or hair: take off all contaminated clothing at once and rinse the skin with water or shower.
• If inhaled: move the person to fresh air and keep them comfortable for breathing.