Technicqll 5-min epoxy adhesive 2x5ml

Technicqll 5-min epoxy adhesive is a fast-setting two-component adhesive for small assembly and repair jobs at home, in the garage and in industry. It contains no solvents. The cured adhesive is beige, and you can paint, drill, sand, thread or file it.

In a car you can use it to repair cracked plastic bumpers, covers and dashboards.

Materials

• Stone, marble, brick, concrete, ceramics, porcelain, glass
• Metals, including aluminium, steel, gold and silver
• Rigid plastic, rubber
• Wood, wood-based materials, cork
• Foams and polystyrene foam
• Not for PE, PP or PTFE

How to use

• The surfaces must be clean and dry. Roughen them with a file or sandpaper, then remove all particles and grease (for example with a degreaser).
• Use the adhesive at temperatures above +10°C.
• Mix the resin (A) and hardener (B) thoroughly in a 1:1 ratio by volume. Use the mixed adhesive within 2 minutes.
• Apply the mixture to one surface, press the parts firmly together and hold them in place until the adhesive has cured.
• You can speed up curing by warming the repair with warm air, for example with a hair dryer.

Technical data

• Mixing ratio (A:B): 1:1 by volume
• Working time: 2 min
• Colour: beige
• Handling strength: 8 min at +20°C
• Full cure: 12 h
• Temperature resistance: -30°C to +80°C
• Storage: +5°C to +25°C
• Pack: 2x5 ml

Warning

• Causes skin irritation and serious eye irritation.
• May cause an allergic skin reaction. Contains epoxy components.
• Toxic to aquatic life with long-lasting effects. Avoid release to the environment.
• Keep out of the reach of children.
• Wear protective gloves, protective clothing, eye protection and face protection.
• If on skin: wash with plenty of soap and water.
• If in eyes: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, then keep rinsing.
• Dispose of the contents and container in line with the waste regulations in force.