Technicqll 10-min transparent epoxy adhesive 2x20ml

Technicqll Epoxy Glue 10 min. transparent is a two-component, colourless epoxy adhesive that sets in 10 minutes. It makes permanent bonds in glass, porcelain, ceramics, rigid plastic, stone, concrete, marble, metals and their alloys, hard rubber and wood, and in combinations of these materials. The adhesive is thick and does not run off vertical surfaces. Once it has cured, you can drill and paint the joint.

In a car you can use it to repair cracked plastic bumpers, covers and dashboards and to seal fuel tanks and radiators. It also suits jewellery work (for example joining amber to gold or silver), joining electronic components and emergency repairs around the house.

Materials

• Glass, porcelain, ceramics, stone, concrete, marble, brick
• Metals and alloys, including aluminium, steel, gold and silver
• Rigid plastic, hard rubber
• Wood, wood-based materials, cork
• Foams and polystyrene foam
• Not for PP, PE or PTFE

How to use

• The surfaces must be clean and dry. Roughen them with a file or sandpaper, then remove all particles and grease (for example with a degreaser).
• Use the adhesive at temperatures above +10°C.
• Mix the resin (A) and hardener (B) thoroughly in a 1:1 ratio by volume. Use the mixed adhesive within 3 minutes.
• Apply the mixture to one surface, press the parts firmly together and hold them in place until the adhesive has cured.
• You can speed up curing by warming the repair with warm air, for example with a hair dryer.

Technical data

• Mixing ratio (A:B): 1:1 by volume
• Working time: 3 min
• Colour: transparent
• Handling strength: 10 min at +20°C
• Full cure: 24 h
• Temperature resistance: -30°C to +80°C
• Storage: +5°C to +25°C
• Pack: 2x20 ml

Warning

• Causes skin irritation and serious eye irritation.
• May cause an allergic skin reaction. Contains epoxy components.
• Toxic to aquatic life with long-lasting effects. Avoid release to the environment.
• Keep out of the reach of children.
• If in eyes: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, then keep rinsing.
• Dispose of the contents and container in line with the waste regulations in force.