Technicqll plastic adhesive PP and PE for hard-to-bond plastics 4g+4ml

Technicqll GEL for PP, PE is a kit for bonding hard-to-bond plastics: it joins polyethylene (PE), polypropylene (PP) and PTFE (Teflon) parts to each other and to other materials. The kit holds a new-generation cyanoacrylate adhesive in gel form and a liquid primer that prepares the polyolefin surfaces for bonding. The adhesive is colourless and waterproof, and the gel does not run off vertical surfaces.

It also bonds easily bonded materials: metal, aluminium, rubber, silicone rubber, hard plastics such as PVC and ABS, wood, ceramics, concrete, glass, plywood, leather, cork, stone, paper and cardboard. You can use it on rigid and on flexible materials.

How to use

• Roughen the surfaces with sandpaper and clean them of dust and grease.
• Apply a thin layer of primer to the PP, PE or PTFE surface only. Easily bonded materials such as metal, PVC or rubber get no primer.
• 2-3 coats of primer at 1-minute intervals are recommended. Wait 3-4 minutes after the last coat.
• Apply a thin layer of gel to one of the surfaces only. The thinner the layer, the stronger the joint.
• Join the parts quickly and correctly aligned, press them firmly together and hold them still for a few seconds.
• Bond at room temperature and 50-60% relative humidity. Too much humidity or too thick a layer can leave a white bloom on the surfaces.

Technical data

• Adhesive: modified cyanoacrylate gel
• Maximum gap filled: 0.25 mm
• Initial cure: under 60 s
• Full cure: 24 h
• Temperature resistance: -55°C to +80°C
• Storage temperature: +5°C to +20°C
• Pack: 4 g + 4 ml

Warning

• Highly flammable liquid and vapour.
• Cyanoacrylate. Danger. Bonds skin and eyes in seconds.
• May cause drowsiness or dizziness.
• May be fatal if swallowed and enters airways.
• Causes skin irritation. May cause respiratory irritation.
• Toxic to aquatic life with long-lasting effects.
• Keep out of reach of children.
• Use only outdoors or in a well-ventilated area.
• Wear protective gloves, protective clothing, eye protection and face protection.
• IF SWALLOWED: immediately call a poison centre or a doctor. Do not induce vomiting.
• IF ON SKIN: wash with plenty of soap and water.
• Dispose of the contents and container in line with the waste regulations in force.