Motip 1K epoxy primer light grey 500ml

Motip 1K Epoxy Primer is a universal 1K epoxy primer for sheet steel, galvanised steel, stainless steel, aluminium and anodised aluminium. It adheres to these surfaces, protects against corrosion and moisture, and is easy to spray and fast drying.

You can apply it wet-on-wet, onto a layer that is still wet. It is suitable as a pre-treatment before water-based and solvent-based base coats and 1K and 2K top coats, and the dry layer can be recoated with all paint systems.

Technical data

• Manufacturer: Motip
• Colour: grey
• Finish: flat matt
• Volume: 500 ml
• Packaging: aerosol can

Use

• The surface must be clean, dry and free of grease.
• Remove loose old lacquer and rust and sand the surface.
• Recommended processing temperature: 10-25 °C.
• Shake the can for 2 minutes and spray a test patch.
• Spray from about 15-20 cm and apply in several thin layers.
• Shake the can again before each next layer.
• After use, clean the valve: turn the can upside down and press the nozzle for about 5 seconds.

Safety

• Extremely flammable aerosol. The container is under pressure and may burst if heated.
• Causes serious eye irritation. May cause drowsiness or dizziness.
• Harmful to aquatic life with long lasting effects.
• If you need medical advice, have the product container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray onto a flame or other ignition source.
• Do not pierce or burn, even after use.
• Do not breathe the spray.
• Protect from sunlight. Do not store above 50 °C.
• Repeated exposure may cause skin dryness or cracking.
• Insufficient ventilation may form explosive mixtures.
• Warning! Hazardous respirable droplets may form when sprayed. Do not breathe the spray or mist.
• Dispose of the contents and container in accordance with local regulations.
• Contains: acetone, isopropanol, isobutanol.