Technicqll instant adhesive 5g

Technicqll CIA - Classic is a colourless instant adhesive based on ethyl cyanoacrylate that cures with moisture from the air. It bonds rubber, ceramics, porcelain, glass, metals, wood and many plastics (not PP, PE or PTFE). Depending on the material, it bonds in anything from 1 second to a dozen or so seconds.

One drop is enough for 2 cm2 of surface. The one-drop nozzle lets you apply the adhesive drop by drop, and its no-clog tip keeps the drop dispenser from gluing itself shut.

Use

• The surfaces to be joined must be clean and dry.
• Apply the adhesive to one of the surfaces, join the parts quickly and check that they are aligned.
• Press the parts together so that the adhesive spreads evenly over the whole joint.
• For the few seconds while the adhesive sets, do not move the parts or try to rejoin them.
• Remove excess adhesive with the Technicqll instant adhesive remover (P-093).

Technical data

• Content: 5 g
• Base: ethyl cyanoacrylate
• Colour: colourless
• Viscosity: 40 cP
• Maximum gap fill: 0.10 mm
• Temperature resistance: -55 °C to +80 °C
• Storage temperature: +5 °C to +20 °C
• Product code: C129

Safety

• Cyanoacrylate, danger: bonds skin and eyes in seconds.
• Causes skin irritation and serious eye irritation, and may cause respiratory irritation.
• Keep out of the reach of children.
• Wear protective gloves, protective clothing, eye protection and face protection.
• IF ON SKIN: wash with plenty of soap and water.
• IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, and continue rinsing.
• If eye irritation persists or skin irritation occurs, get medical advice.
• Dispose of the contents and container in line with the waste regulations in force.