Motip Stone Chip Spray (High Solid) grey stone chip protection 500ml

Motip Stone Chip Spray (High Solid) is a grey stone chip protection in a 500 ml aerosol can with a high solid content. It protects the underside and visible bodywork parts of a car against stone chips.

The layer prevents rust, resists weather and weak acids and bases, dampens sound and stays flexible. You can paint over it with any paint.

Use

• Remove loose old lacquer and rust and sand the surface. It must be clean, dry and grease-free.
• Recommended processing temperature: 15-25 °C, can at room temperature.
• Shake the can for 2 minutes and spray a test patch.
• Spray from about 25-30 cm and apply in several layers.
• Once dry, the layer can be painted over with any lacquer system without sanding.
• After use, clean the valve: turn the can upside down and press the nozzle for about 5 seconds.
• Drying time depends on the ambient temperature, the air humidity and the thickness of the applied layer.

Technical data

• Manufacturer: Motip
• Product code: 000010
• Colour: grey
• Grade: High Solid
• Volume: 500 ml
• Packaging: aerosol can

Safety

• Extremely flammable aerosol. The container is under pressure and may burst if heated.
• Causes serious eye irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness.
• Harmful to aquatic life with long lasting effects.
• If you need medical advice, have the product container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray onto a flame or other ignition source.
• Do not pierce or burn, even after use.
• Do not breathe the spray.
• Protect from sunlight. Do not store above 50 °C.
• Repeated exposure may cause skin dryness or cracking.
• Insufficient ventilation may form explosive mixtures.
• Dispose of the contents and container in accordance with local regulations.