Motip 1K texture spray black 500ml

Motip 1K Texture Spray is a texture spray for restoring the structure of repaired plastic surfaces. It suits exterior parts such as bumpers, mirrors, guards and tuning parts, and interior parts such as the dashboard and centre console.

Once dry, it can be recoated with water-based and solvent-based base coats and 1K and 2K top coats.

Technical data

• Manufacturer: Motip
• Colour: black
• Finish: flat matt
• Volume: 500 ml
• Packaging: aerosol can

Use

• The surface must be clean, dry and free of grease.
• Remove loose old lacquer and rust and sand the surface.
• Recommended processing temperature: 10-25 °C.
• Shake the can for 2 minutes and spray a test patch.
• Spray from about 15-20 cm and apply in several thin layers.
• After use, clean the valve: turn the can upside down and press the nozzle for about 5 seconds.

Safety

• Extremely flammable aerosol. The container is under pressure and may burst if heated.
• Causes serious eye irritation. May cause drowsiness or dizziness.
• If you need medical advice, have the product container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray onto a flame or other ignition source.
• Do not pierce or burn, even after use.
• Do not breathe the spray.
• Protect from sunlight. Do not store above 50 °C.
• Repeated exposure may cause skin dryness or cracking.
• Insufficient ventilation may form explosive mixtures.
• Dispose of the contents and container in accordance with local regulations.
• Contains: ethyl acetate, n-butyl acetate, butanone.