Loctite 2701 extra strong threadlocker 5ml

Loctite 2701 is an extra strong threadlocker for heavily loaded bolts, nuts and studs. It keeps the thread from working loose under vibration and seals it at the same time. Use it on permanent threaded joints that you do not need to take apart often: with ordinary tools the joint is hard to undo, so heat it to 150 °C before you dismantle it.

It suits all threaded joints, stainless and zinc-coated steel included, and you can also use it to retain shafts in sleeves. Wipe off any excess with a dry cloth or cleaning paper.

Uses

• Threaded joints in the gearbox, steering, axle and engine mounts
• Locking and sealing the threaded joints of the cylinder head
• Camshaft drive gear
• Studs in the cylinder head and in pump housings

Technical data

• Thread size: up to M20
• Operating temperature: -55 °C to +150 °C
• Base: dimethacrylate ester
• Colour: green
• Volume: 5 ml

Warning

• Causes skin irritation.
• May cause an allergic skin reaction.
• Causes serious eye irritation.
• Suspected of causing cancer.
• May cause damage to organs through prolonged or repeated exposure.
• If you need medical advice, have the product container or label at hand.
• Keep out of reach of children.
• Do not breathe dust, fume, gas, mist, vapour or spray.
• Wash thoroughly after handling.
• Do not take contaminated work clothing out of the workplace.
• Wear protective gloves, protective clothing, eye protection and face protection.
• IF ON SKIN: wash with plenty of soap and water.
• IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• IF exposed or concerned: get medical advice.
• If skin irritation or rash occurs: get medical advice.
• If eye irritation persists: get medical advice.
• Take off contaminated clothing and wash it before reuse.
• Store locked up.
• Dispose of the contents and container in accordance with applicable waste regulations.