OSRAM LEDriving Lightbar MX250-CB LED driving light

OSRAM LEDriving Lightbar MX250-CB is an LED driving light for 12/24 V vehicles, used as an additional high beam and position light. Its combo beam gives widespread illumination in the near field and spot illumination in the far field. 26 LEDs give a luminous flux of up to 2700 lm with a color temperature of 6000 K, and the light reaches up to 320 m at 1 lx.

The housing is aluminium and the lens is polycarbonate. OSRAM tested the light in its DIN-certified environmental simulation laboratory and validated it to type of protection IP69K against water, dust, impacts, heat, cold and continuous vibration. An integrated driver and thermal management prevent overheating, and polarity protection switches the LEDs off automatically if the supply polarity is wrong. The lifespan is up to 5000 h.

The light has ECE type approval, so you can fit it and use it on public roads without registering it or entering it in the vehicle documents. Special installation requirements apply, and you also need to follow your country's own rules and laws. You can fit it to cars, trucks, agricultural machinery, commercial vehicles, construction vehicles, caravans, off-road vehicles and ATVs.

Technical data

• Application: additional high beam and position light
• Product code: LEDDL110-CB
• Beam pattern: Combo
• Light distance at 1 lx: 320 m
• Luminous flux: 2700 lm
• Color temperature: 6000 K
• Nominal voltage: 12/24 V
• Test voltage: 13.5 V
• LEDs per module: 10/26
• Lifespan: 5000 h
• Type of protection: IP69K
• Standards: ECE R10, R112, R7
• Approval mark: E4
• ECE reference number: 30
• Connector to lamp: open wire ends
• Dimensions (L x W x H): 390 x 86 x 54 mm
• Product weight: 2000 g
• Pack: 1 pc, 2.37 kg
• Guarantee: 5 years