Motip dry PTFE lubricant 500ml

Motip PTFE Dry is a dry lubricant in a 500 ml aerosol can for mechanical parts made of metal and plastic where oil and grease residues are unwanted. It leaves no oil or grease residue (dry film) and reduces friction between mechanical parts. It also works as a mould release where silicone is not desired. It is used on chains, tools, drills, rails and lock mechanisms, and it suits parts under light load and at low speed. After the solvent has evaporated (approximately 1 minute), a protective dry PTFE film remains on the surface.

Technical data

• Volume: 500 ml
• Packaging: aerosol can
• Type: dry lubricant, PTFE
• Recommended processing temperature: 10-25 °C, aerosol at room temperature

Use

• Shake the aerosol before use.
• Apply a thin layer.
• After the solvent evaporates, a protective PTFE layer forms on the surface.

Safety

• Extremely flammable aerosol. The container is under pressure and may burst if heated.
• Causes serious eye irritation.
• May cause drowsiness or dizziness.
• Toxic to aquatic life with long lasting effects.
• Repeated exposure may cause skin dryness or cracking.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• Do not spray on a flame or other ignition source. Do not pierce or burn, even after use.
• Do not breathe the spray.
• Protect from sunlight. Do not store above 50 °C.
• If you need medical advice, have the product container or label at hand.
• Keep out of reach of children.
• May form explosive mixtures with air if ventilation is insufficient.
• Dispose of the contents and container in accordance with regional regulations.
• Contains: pentane, isopropanol.