Motip spray putty 400ml

Motip Spray Putty is a spray putty in a 400 ml aerosol can. You use it to fill irregularities in treated and untreated surfaces of wood, metal and aluminium. The layer sands easily, wet or dry, from grit 400.

Technical data

• Volume: 400 ml
• Packaging: aerosol can
• Colour: beige grey
• Finish: flat matt
• Recommended processing temperature: 10-25 °C, aerosol at room temperature
• Sanding: wet and dry, from grit 400

Use

• The surface must be clean, dry and free of grease.
• Remove loose old lacquer and rust and sand the surface.
• Shake the can for 2 minutes and spray a test patch.
• Spray from about 25-30 cm in several thin layers, and shake the can again before each layer.
• Apply a primer before the finishing coat.
• After use, clean the valve: turn the can upside down and press the nozzle for about 5 seconds.

Safety

• Extremely flammable aerosol. The container is under pressure and may burst if heated.
• Causes skin irritation.
• Causes serious eye irritation.
• May cause respiratory irritation.
• May damage organs through prolonged or repeated exposure.
• Harmful to aquatic life with long lasting effects.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• Do not spray on a flame or other ignition source. Do not pierce or burn, even after use.
• Warning! Hazardous respirable droplets may form when sprayed.
• Do not breathe the spray or mist.
• Protect from sunlight. Do not store above 50 °C.
• If you need medical advice, have the product container or label at hand.
• Keep out of reach of children.
• May form explosive mixtures with air if ventilation is insufficient.
• Dispose of the contents and container in accordance with regional regulations.
• Contains: xylene, n-butanol.