Motip plastic primer 400ml

Motip Plastic Primer is a 400 ml aerosol primer that forms an intermediate layer between plastic and the paint coating, so acrylic paints bond to the plastic surface. It suits various types of untreated plastic, including hard plastics. Once dry, it can be sprayed over with all lacquer systems without sanding. It is not suitable for treating PE.

Technical data

• Manufacturer: Motip
• Volume: 400 ml
• Packaging: aerosol can
• Colour: colourless
• Finish: flat matt
• Working temperature: 10-25 °C, aerosol at room temperature

Use

• The surface must be clean, dry and free of grease. If you like, sand the surface lightly with grain 600.
• Shake the aerosol for 2 minutes and spray a test patch.
• Spray from about 25-30 cm and apply the primer in a maximum of two thin layers.
• After use, clean the valve: turn the aerosol upside down and press the nozzle for about 5 seconds.

Safety

• Extremely flammable aerosol. The container is under pressure and may burst if heated.
• Causes skin irritation. May cause drowsiness or dizziness.
• Toxic to aquatic life with long lasting effects.
• If you need medical advice, have the product container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray onto a flame or other ignition source.
• Do not pierce or burn, even after use.
• Do not breathe the spray.
• Protect from sunlight. Do not store above 50 °C.
• Insufficient ventilation may form explosive mixtures.
• Dispose of the contents and container in accordance with regional requirements.
• Contains: hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane.