Motip electrical contact cleaner 200 ml

Motip Contact Cleaner cleans the electrical contacts in a car, such as the battery. Its uses range from batteries to mixing panels and switches. It is non-corrosive, non-conductive and leaves no residue.

The valve works at 360°, so you can spray in various positions.

Technical data

• Volume: 0.2 l
• Recommended processing temperature: 10-25 °C (aerosol at room temperature)
• Valve: 360°

Application

• Switch off electrical installations before treatment.
• Shake the aerosol for 2 minutes before use.
• Spray the parts until the contamination has disappeared.
• Switch the installation on only after the solvent has evaporated, at least 15 minutes.
• Contaminated contact cleaner is chemical waste.

Safety

• Extremely flammable aerosol; the container is under pressure and may burst when heated.
• Causes skin irritation and serious eye irritation.
• May cause drowsiness or dizziness.
• Toxic to aquatic life, long-lasting effects.
• Keep away from heat, hot surfaces, sparks, flames and other ignition sources; do not smoke.
• Do not spray onto flames or other ignition sources.
• Do not pierce or burn, even after use.
• Do not inhale the spray.
• Protect from sunlight; do not store above 50 °C.
• Keep out of reach of children.
• Insufficient ventilation may form explosive mixtures.
• If you need a doctor, take the pack or label with you.
• Dispose of the contents and container according to regional requirements.
• Contains: hydrocarbons C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane; isopropanol