Liqui Moly Wax Coating 300ml

Liqui Moly Wax Coating is a wax coating in an aerosol can that leaves a wax-based corrosion protection layer on the surface. It combines wax-based protective agents and forms an elastic, well-adhering, transparent and waterproof film that is not oily.

The coating gives treated parts long-term protection whether you store them indoors or outdoors, and protects machines and metal components during storage, transport and dispatch. The thin coat does not hinder later welding, and once it has dried you can handle the treated items as normal. To remove the wax coating, use Liqui Moly Engine Compartment Cleaner (part no. 3326).

Usage

• Shake the can thoroughly before use.
• Spray an even coat onto a clean, dry surface.
• The contents of the can should be at room temperature when you apply them.
• For stronger corrosion protection, apply several coats.
• Spray in a well-ventilated room.
• After use, clear the nozzle: hold the can upside down and spray until only propellant comes out.

Technical data

• Volume: 300 ml
• Coat thickness: 15-50 μm, depending on environmental conditions
• Product code: P000600

Warning

• May cause drowsiness or dizziness.
• Harmful to aquatic life with long lasting effects.
• Extremely flammable aerosol.
• Pressurised container: may burst if heated.
• Repeated exposure may cause skin dryness or cracking.
• Contains sulfonic acids, petroleum, calcium salts.
• May produce an allergic reaction.
• If you need medical advice, have the product container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• Do not spray on an open flame or other ignition source.
• Do not pierce or burn, even after use.
• Avoid breathing vapour or spray.
• Use only outdoors or in a well-ventilated area.
• Store locked up.
• Protect from sunlight. Do not expose to temperatures above 50 °C.
• Dispose of the contents and container in line with local waste regulations.