Technicqll double-sided assembly tape, extra strong 1.5m x 19mm

Technicqll Assembly Tape is a double-sided tape made of flexible PU foam that bonds with a rubber-based pressure-sensitive adhesive. It sticks to most smooth, hard surfaces: metals, plastic, glass, wood, ceramics, marble, plaster, and painted and lacquered surfaces. It withstands water and temperature changes and is made for use indoors. Peeling the tape off does not damage lacquered surfaces.

Use it at home, in the office and in the workshop to fix trim strips, wall lights, calendars, thermometers, phones, signs and holders, kitchen and bathroom accessories and nameplates. You can also fix small mirrors in dry rooms and hang pictures and photos on a wall.

Directions

• Clean the surfaces to be joined and degrease them.
• Do not degrease with cleaners that contain shine agents.
• The surfaces must be even and match each other: on an uneven surface the tape holds at only a few points.
• Use the tape at temperatures above +10 °C.
• Cut a piece of the right length and apply it to one surface so that the tape is in full contact with it. 1 cm² of tape holds up to 10 kg.
• Peel off the liner without touching the adhesive layer.
• Line up the parts, press them firmly together and hold them in place for 15 seconds.
• The joint reaches full strength after 24 hours.

Technical data

• Size: 1.5 m x 19 mm
• Thickness: 1.0 mm
• Carrier: PU foam
• Adhesive: rubber-based pressure-sensitive adhesive
• Adhesion: 110 N/25 mm (to PE)
• Maximum load: 300 g per cm of tape
• Foam density: 0.1 g/cm³
• Colour: white
• Temperature resistance: -10 to +75 °C
• Storage: +5 to +25 °C
• Product code: T693