Chamäleon 488 Filling primer black 1L

Chamäleon 488 2K Filling primer 5:1 is a two-component filling primer for metal, old paint and hard plastic. It does not shrink as it dries, and in spot repairs it does not sink or build up at the edges. It protects the surface against corrosion, and you can sand it even after some time.

Mix the primer with hardener S120-12884 in a 5:1 ratio. If needed, add 15-20% thinner, or 30-40% for wet-on-wet application. Drying time at 20 °C is about 6-8 h.

Technical data

• Type: two-component (2K) filling primer
• Colour: black
• Volume: 1 L
• Mixing ratio: 5:1
• Hardener: S120-12884
• Thinner: 15-20%, wet-on-wet 30-40%
• Drying time at 20 °C: about 6-8 h

Warning

• Flammable liquid and vapour.
• Causes skin irritation.
• Causes serious eye irritation.
• May cause an allergic skin reaction.
• May cause damage to hearing through prolonged or repeated exposure.
• Contains epoxy constituents. May produce an allergic reaction.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• Do not breathe dust, fumes, gas, mist, vapours or spray.
• Wear protective gloves, protective clothing, eye protection, a protective mask and hearing protection.
• IF ON SKIN (or hair): take off immediately all contaminated clothing. Rinse skin with water or shower.
• IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Store in a well-ventilated place.
• Keep cool.