Bosch KTS 560 control unit diagnostic tester with single-channel multimeter

The Bosch KTS 560 is a diagnostic module for control units with an integrated single-channel multimeter, made for the professional workshop. With its PassThru interface you reprogram control units, and for diagnostics it uses up to three CAN and K-Line interfaces in parallel.

It works with the ESI[tronic] diagnostic software (sold separately) on any Windows PC with ESI[tronic] installed and licensed.

• Integrated single-channel multimeter for measuring voltage, current and resistance
• Ethernet interface (DoIP, Diagnostics over Internet Protocol) for current and future Ethernet-based vehicle interfaces
• Parallel diagnostics over up to three CAN and K-Line interfaces at once
• Control unit reprogramming to Euro 5 / Euro 6 / PassThru requirements and access to technical repair information: vehicle-specific information and manufacturer data for diagnostics, servicing and repair
• Compatible with Bosch Easy Connect and other Bosch vehicle-specific adapters, which extend diagnostics with maker-specific non-OBD cables
• Bluetooth connection with a range of up to 100 m

Technical data

• Operating voltage: 8 V DC to 28 V DC
• Power draw from the vehicle battery or mains: < 10 W
• PC connections: USB 2.0, Bluetooth class 1
• Weight: approx. 0.5 kg
• Dust and water protection: IP53
• Multimeter bandwidth: 100 kHz
• Vehicle protocols: ISO 15031, ISO 22900, SAE J2534-1 and -2 (PassThru), ISO 9141-2 (K and L), SAE J1850 VPW and PWM, CAN High Speed ISO 11898, ISO 15765-4 (OBD), CAN Single Wire, CAN Low Speed, ISO 13400 (Diagnostics over IP) and other vehicle-specific protocols
• Dimensions (W x H x D): 125 x 44 x 180 mm
• Operating temperature: 5 °C to 40 °C