Technicqll colourless sanitary sealant 20ml

Technicqll Sanitary Sealant in a small tube is a one-component acetoxy silicone sealant for joints in bathrooms, kitchens and other damp rooms. It contains anti-fungal compounds that keep mould from forming. It cures with moisture from the air into a permanently elastic joint that resists mould, fungi and weather. This one is colourless, in a 20 ml tube.

Uses

• Finishing around shower cabins, baths and washbasins
• Sealing kitchen worktops
• Fitting sinks
• Filling joints

Suitable materials

Glass, metals, wood, plaster, brick, plastics, ceramics, stone, plasterboard and polystyrene foam.

Do not use

• For joints with Teflon, PP or PE
• On PVC, concrete, marble, acrylic or corrosion-sensitive metals (lead, zinc, copper, iron)
• In aquariums or for bonding mirrors

Technical data

• Base: polysiloxane, acetoxy cure system
• Colour: colourless
• Volume: 20 ml
• Consistency: thixotropic paste
• Density: 0.97-0.99 g/cm³
• Tack-free time: 25 min (at 23 °C and 50% humidity)
• Full cure: 2 mm / 24 h
• Working temperature (air and substrate): +5 °C to +30 °C
• Temperature resistance: -40 °C to +120 °C
• Storage: +5 °C to +25 °C

The joint should be at least 4 mm and at most 25 mm wide.

How to use

The surfaces must be clean, grease-free and dry. Do not wet the substrate or the silicone layer with water. Apply the sealant, smooth it with a spatula dipped in soapy water and remove the masking tape after about 10 minutes. Leave joined parts until the silicone has fully cured. Remove fresh residue with soapy water or extraction naphtha, and cured silicone with a knife or spatula. Neoprene and bitumen may cause staining. Above 120 °C the silicone discolours.

Safety

Contains 4,5-dichloro-2-octyl-2H-isothiazol-3-one. May cause an allergic reaction. Hazardous to aquatic life with long lasting effects. Keep out of reach of children and avoid release to the environment. Dispose of contents and container at a suitable waste facility.