# Technicqll enamel repair kit in a syringe 6ml

- **Brand:** [Technicqll](https://autotools.ee/en/brands/technicqll)
- **Product code:** E562
- **EAN:** 5902051007562
- **Price:** ~~€8.90~~ €8.01 incl. VAT
- **Availability:** 5+ available · ready in Tallinn in 1–2 working days
- **Category:** [Car chemicals](https://autotools.ee/en/c/car-care) > [Maintenance and repair chemicals](https://autotools.ee/en/c/maintenance-chemicals)
- **Link:** https://autotools.ee/en/products/emaili-remondikomplekt-sustlas-technicqll-6ml

## Description

Technicqll liquid epoxy enamel is an epoxy-resin based liquid ceramic in a syringe for repairing cracks, scratches and other defects on white enamel, ceramic, acrylic and lacquered surfaces. The two components are mixed 1:1. The enamel adheres to all materials except polyethylene and polypropylene, resists cleaning agents and detergents, and can be sanded once it has cured.

The kit holds the syringe of enamel, a protective sticker and polyethylene film. Cured enamel can only be removed mechanically.

**Uses**

- Sanitary ware: baths, washbasins, urinals, shower trays, cisterns and sinks
- Washing machines, refrigerators and gas cookers
- Filling defects in lacquered furniture and in tiles

**Do not use**

- For repairing enamelled pots
- For bonding or filling PP, PE and PTFE

**How to use**

- Clean the area of rust and loose old coating, degrease it and let it dry.
- Break the tip off the syringe nozzle and remove the guard between the plungers. Squeeze a little enamel onto a sheet of paper to push out air bubbles.
- Cut a hole the size of the repair in the white protective sticker and stick it onto the surface.
- Squeeze out the amount you need and mix the components thoroughly with a spoon for at least 2 minutes.
- Apply the mix to the repair, spread it evenly and take off the excess so the surface stays level.
- Once the mix is applied, remove the protective sticker.
- For a smooth, glossy surface, lay the polyethylene film on the uncured enamel and smooth it gently. Remove the film once the enamel has fully cured.
- Fill scratches and small cracks with a sharp stick, such as a toothpick.
- On vertical surfaces apply the enamel in thin layers so it does not run. Apply the next layer once the previous one has cured, at intervals of about 3 hours.
- Wash the repaired item with detergents no earlier than 7 days after the repair.

**Technical data**

- Base: epoxy resin
- Mixing ratio: 1:1
- Colour: white
- Pot life after mixing: 30 min
- Initial cure: 5 h
- Full cure: 24 h
- Temperature resistance: -40°C to +80°C
- Application temperature: above +10°C
- Volume: 6 ml

**Warning**

- Harmful if swallowed.
- Causes severe skin burns and eye damage.
- Causes skin irritation.
- May cause an allergic skin reaction.
- Causes serious eye irritation.
- Toxic to aquatic life with long-lasting effects.
- Harmful to aquatic life with long-lasting effects.
- Contains epoxy constituents. May produce an allergic reaction.
- Keep out of the reach of children.
- Do not get in eyes, on skin or on clothing.
- Avoid release to the environment.
- IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- Dispose of the contents and container in line with the waste regulations in force.

## How it gets to you

- **I'll collect it, Tallinn:** Free · Usually ready in 1–2 working days
- **Parcel machine:** from €2.47 · free from €100.00 · Delivery in 1–3 business days
- **Courier:** from €6.82 · free from €100.00 · Delivery in 2–5 business days